5pcs TP4056 1A lithium battery charging board module 1A with protection TYPE-C

Description:

Brand new and high quality

This circuit board has charging function and battery discharge protection function, which can be charged and discharged at the same time

Module features and parameters:
Input with TYPE C USB socket
You can directly use the mobile phone charger as input to charge the lithium battery,
And still retains the input voltage wiring solder joints, which can be very convenient for DIY
Input voltage: 5V
Charge cut-off voltage: 4.2V ±1%
Large charging current: 1000mA
Battery over-discharge protection voltage: 2.5V
Battery overcurrent protection current: 3A
Board size: 2.6*1.7CM

Instructions:
Note: When the battery is connected for the first time, there may be no voltage output between OUT+ and OUT-. At this time, the protection circuit can be activated by connecting the 5V voltage and charging it. If the battery is short-circuited from B+ B- and then connected, it also needs to be charged. Power off to activate the protection circuit. When using a mobile phone charger as input, note that the charger should be able to output 1A or more, otherwise it may not be able to charge normally
The TYPE C USB socket and the + – pads next to it are the power input terminals, which are connected to 5V voltage. B+ is connected to the positive side of the lithium battery, and B- is connected to the negative side of the lithium battery. OUT+ and OUT- are connected to the load, such as the positive and negative of the mobile booster board or other loads.

Connect the battery to B+ B-, insert the mobile phone charger into the USB socket, the red light is charging, the blue light is fully charged

Package Included:

5 X TP4056 1A Lithium Battery Charger Modules